Page 97 – Food Additives & Ingredients Supplier

Citric Acid Monohydrate MSDS

Citric Acid Monohydrate E330 MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Citric Acid Monohydrate E330
1.2. Description: Citric Acid Monohydrate E330 is a organic compound manufactured through chemical synthesis.
1.3. Chemical Formula: C6H8O7.H2O
1.4. Molecular weight: 210.14
1.5. CAS #: 5949-29-1
1.6. EINECS #: 201-069-1
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Citric Acid Monohydrate E330 manufacturer.
1.9. Usage: In food as Acidulants

2. Composition

2.1. Citric Acid Monohydrate: 99.5%～100.5%
2.2. Hazardous impurities: Negative

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: Colourless Crystal or White Crystal powder
3.3. Odor: Odorless
3.4. pH: Not available
3.5. Melting point/range: Not available
3.6. Boiling point: Not available
3.7. Bulk density: 1.542 g/cm3
3.8. Solubility: Soluble in cold water, hot water.

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Oxidizing agents, sulfides, metal nitrates, alkali carbonates, alkalis, potassium tartrate, acetates, bicarbonates.

5. Handling/Storage

5.1. Storage: Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Citric Acid Monohydrate E330 need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Citric Acid Monohydrate E330 is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Citric Acid Monohydrate E330 dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Citric Acid Monohydrate is fully biodegradable and the products of degradation are not toxic.

12. Other Information

12.1. The information in this Citric Acid Monohydrate E330 MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the Citric Acid Monohydrate E330 MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the Citric Acid Monohydrate E330 MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Collagen Casing MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Collagen Casing
1.2. Description: Collagen Casing is a collagen manufactured through animal tissue extraction.
1.3. Chemical Formula: Not Applicable
1.4. Molecular weight: Not available
1.5. CAS #: 9064-67-9
1.6. EINECS #: Not Applicable
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Collagen Casing manufacturer.
1.9. Usage: In food as Nutrition supplements

2. Composition

2.1. Collagen Casing: 40% min (Wet Basis)
2.2. Hazardous impurities: Negative

3. Physical/Chemical Characteristics

3.1. Physical State: Solid Sheet
3.2. Appearance: Colourless Crystal sheet
3.3. Odor: Odorless
3.4. pH: Not available
3.5. Melting point/range: Not available
3.6. Boiling point: Not available
3.7. Bulk density: Not available
3.8. Solubility: Insoluble

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 12 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2), nitrogen oxides (NO, NO2…)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities. Avoid dust formation and control ignition sources
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Collagen Casing need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Collagen Casing is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: Not applicable
7.3. Contact with skin: Not available
7.4. Ingestion: Not available
7.5. Inhalation: Not available
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Not applicable
8.2. Contact with skin: Not available
8.3. Ingestion: Not available
8.4. Inhalation: Not available

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Not applicable
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Collagen Casing is fully biodegradable and the products of degradation are not toxic.

12. Other Information

12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Dextrose Anhydrous MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Dextrose Anhydrous
1.2. Description: Dextrose Anhydrous is a organic compound manufactured through chemical synthesis.
1.3. Chemical Formula: C6H12O6
1.4. Molecular weight: 180.16
1.5. CAS #: 50-99-7
1.6. EINECS #: 200-075-1
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Dextrose Anhydrous manufacturer.
1.9. Usage: In food as Sweeteners

2. Composition

2.1. Dextrose Anhydrous: >99%
2.2. Hazardous impurities: Negative

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: WHITE CRYSTALLINE POWDER
3.3. Odor: Not available
3.4. pH: Not available
3.5. Melting point/range: 146°C
3.6. Boiling point: Not available
3.7. Bulk density: 1.54 g/cm3
3.8. Solubility: 90.9 g/100 mL @ 25 °C

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Oxidizing agents.

5. Handling/Storage

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Dextrose Anhydrous need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Dextrose Anhydrous is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: No hazard expected in normal industrial handling
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: No specific treatment is necessary
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Dextrose Anhydrous dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Dextrose Anhydrous is fully biodegradable and the products of degradation are not toxic.

12. Other Information

12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Dextrose Monohydrate MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Dextrose Monohydrate
1.2. Description: Dextrose Monohydrate is a organic compound manufactured through chemical synthesis.
1.3. Chemical Formula: C6H12O6.H2O
1.4. Molecular weight: 198.17
1.5. CAS #: 5996-10-1
1.6. EINECS #: 218-914-5
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Dextrose Monohydrate manufacturer.
1.9. Usage: In food as Sweeteners

2. Composition

2.1. Dextrose Monohydrate: ≥99.5%
2.2. Hazardous impurities: Arsenic ≤1MG/KG, Lead ≤0.1MG/KG, Sulfate ≤0.002%

3. Physical/Chemical Characteristics

3.1. Physical State: Solid
3.2. Appearance: WHITE CRYSTALLINE GRANULES
3.3. Odor: Not available
3.4. pH: Not available
3.5. Melting point/range: 86°C
3.6. Boiling point: Not available
3.7. Bulk density: 1.54 g/cm3
3.8. Solubility: Easily soluble in cold water.

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Oxidizing agents.

5. Handling/Storage

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Dextrose Monohydrate need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Dextrose Monohydrate is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: No hazard expected in normal industrial handling
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: No specific treatment is necessary
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Dextrose Monohydrate dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Dextrose Monohydrate is fully biodegradable and the products of degradation are not toxic.

12. Other Information

12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Erythorbic Acid MSDS

Erythorbic Acid E315 MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Erythorbic Acid E315
1.2. Description: Erythorbic Acid E315 is a organic compound manufactured through chemical synthesis.
1.3. Chemical Formula: C6H8O6
1.4. Molecular weight: 176.12
1.5. CAS #: 89-65-6
1.6. EINECS #: 201-928-0
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Erythorbic Acid E315 manufacturer.
1.9. Usage: In food as Antioxidants

2. Composition

2.1. Erythorbic Acid: 99.0 – 100.5%
2.2. Hazardous impurities: Arsenic ≤3PPM, Lead ≤5PPM, Heavy metal ≤10PPM

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: White odorless, crystalline powder or granules
3.3. Odor: Distinctive sugary odor
3.4. pH: 1.9-2.5 (10% solution)
3.5. Melting point/range: 164–172 °C (decomposes)
3.6. Boiling point: Not available
3.7. Bulk density: 0.704 g/cm3
3.8. Solubility: Soluble. (40 g/100 mL water)

4. Stability/Reactivity

4.1. Chemical Stability: Product is normally stable. Erythorbic Acid E315 darkens on exposure to light.
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Oxidizing agents.

5. Handling/Storage

5.1. Storage: Store in a cool and dry place and Keep away from strong light and heat
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Erythorbic Acid E315 need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Erythorbic Acid E315 is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Erythorbic Acid E315 dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Erythorbic Acid E315 is fully biodegradable and the products of degradation are not toxic.

12. Other Information

12.1. The information in this Erythorbic Acid E315 MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the Erythorbic Acid E315 MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the Erythorbic Acid E315 MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Liquid Glucose MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Liquid Glucose
1.2. Description: Liquid Glucose is a polysaccharide manufactured through chemical synthesis.
1.3. Chemical Formula: C6H12O6
1.4. Molecular weight: 180.16
1.5. CAS #: 8027-56-3
1.6. EINECS #: Not Applicable
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Liquid Glucose manufacturer.
1.9. Usage: In food as Sweeteners

2. Composition

2.1. Liquid Glucose: DE 40-65%
2.2. Hazardous impurities: Arsenic ≤0.5MG/KG, Sulfur dioxide ≤30MG/KG, Sulfate Ash ≤0.4MG/KG

3. Physical/Chemical Characteristics

3.1. Physical State: Liquid
3.2. Appearance: Thick transparent liquid, no visible impurities
3.3. Odor: Special smell of maltose
3.4. pH: 4.0-6.0
3.5. Melting point/range: Not available
3.6. Boiling point: Not available
3.7. Bulk density: Not available
3.8. Solubility: Soluble in cold water, hot water.

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Liquid Glucose need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Liquid Glucose is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Liquid Glucose is stored or processed.
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Absorb with an inert material and put the spilled material in an appropriate waste disposal.

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Liquid Glucose is fully biodegradable and the products of degradation are not toxic.

12. Other Information

12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Magnesium Citrate MSDS

Magnesium Citrate E345 MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Magnesium Citrate E345
1.2. Description: Magnesium Citrate is a organic compound manufactured through chemical synthesis.
1.3. Chemical Formula: C6H6MgO7
1.4. Molecular weight: 214.41
1.5. CAS #: 7779-25-1
1.6. EINECS #: 231-923-9
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Magnesium Citrate E345 manufacturer.
1.9. Usage: In food as Acidulants

2. Composition

2.1. Magnesium Citrate: 100%
2.2. Hazardous impurities: Negative

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: White or slight yellow powder
3.3. Odor: Odorless.
3.4. pH: Not available
3.5. Melting point/range: Not available
3.6. Boiling point: Not available
3.7. Bulk density: Not available
3.8. Solubility: Soluble in cold water, hot water.

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Magnesium Citrate need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Magnesium Citrate E345 is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Magnesium Citrate dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Magnesium Citrate is fully biodegradable and the products of degradation are not toxic.

12. Other Information

12.1. The information in this Magnesium Citrate E345 MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the Magnesium Citrate E345 MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the Magnesium Citrate E345 MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Potassium Benzoate MSDS

Potassium Benzoate E212 MSDS

1.1. Product Name: Potassium Benzoate E212
1.2. Description: Potassium Benzoate E212 is a potassium salt of benzoic acid manufactured through chemical synthesis.
1.3. Chemical Formula: C7H5KO2
1.4. Molecular weight: 160.21
1.5. CAS #: 582-25-2
1.6. EINECS #: 209-481-3
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Potassium Benzoate E212 manufacturer.
1.9. Usage: In food as Preservatives

2. Composition

2.1. Potassium Benzoate: ≥99.0%
2.2. Hazardous impurities: Heavy Metals(PB) ≤0.001%, Arsenic ≤0.0002%

3. Physical/Chemical Characteristics

3.1. Physical State: Solid
3.2. Appearance: White granular
3.3. Odor: Odorless
3.4. pH: Not available
3.5. Melting point/range: >300 °C
3.6. Boiling point: Not available
3.7. Bulk density: 1.5 g/cm3
3.8. Solubility: 73.83 g/100 mL @ 25 °C

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Store in a cool and dry place and Keep away from strong light and heat
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Potassium Benzoate E212 need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Potassium Benzoate E212 is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Potassium Benzoate E212 dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Potassium Benzoate is fully biodegradable and its products of degradation are more toxic.

12. Other Information

12.1. The information in this Potassium Benzoate E212 MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the Potassium Benzoate E212 MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the Potassium Benzoate E212 MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Disodium Pyrophosphate MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Disodium Pyrophosphate
1.2. Description: Disodium Pyrophosphate is a inorganic compound manufactured through chemical synthesis.
1.3. Chemical Formula: Na2H2P2O7
1.4. Molecular weight: 221.94
1.5. CAS #: 7758-16-9
1.6. EINECS #: 231-835-0
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Disodium Pyrophosphate manufacturer.
1.9. Usage: In food as leavening agent

2. Composition

2.1. Disodium Pyrophosphate: ≥95.0%
2.2. Hazardous impurities: Heavy Metals ≤15PPM, Arsenic ≤3PPM, Lead ≤4PPM, MERCURY ≤1PPM

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: WHITE POWDER
3.3. Odor: Odorless
3.4. pH: 3.5-4.5
3.5. Melting point/range: >600 °C
3.6. Boiling point: Not available
3.7. Bulk density: 2.31 g/cm3
3.8. Solubility: 11.9 g/100 mL @ 20 °C

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Disodium Pyrophosphate need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Disodium Pyrophosphate is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Disodium Pyrophosphate dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Disodium Pyrophosphate is fully biodegradable and its products of degradation are more toxic.

12. Other Information

12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Sodium Alginate MSDS

Sodium Alginate E401 MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Sodium Alginate E401
1.2. Description: Sodium Alginate E401 is a polysaccharide manufactured through chemical synthesis.
1.3. Chemical Formula: (C6H7O6Na)
1.4. Molecular weight: Not available
1.5. CAS #: 9005-38-3
1.6. EINECS #: 231-915-5
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Sodium Alginate E401 manufacturer.
1.9. Usage: In food as Thickeners

2. Composition

2.1. Sodium Alginate: ≥98.0%
2.2. Hazardous impurities: Heavy Metals ≤0.004%, Arsenic ≤0.0003%, Lead ≤0.001%

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: white or yellowish granular or powder
3.3. Odor: Odorless
3.4. pH: Not available
3.5. Melting point/range: >300°C
3.6. Boiling point: Not available
3.7. Bulk density: Not available
3.8. Solubility: Soluble in cold water, hot water

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Sodium Alginate E401 need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Sodium Alginate E401 is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Sodium Alginate E401 dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Sodium Alginate E401 is fully biodegradable and its products of degradation are more toxic.

12. Other Information

12.1. The information in this Sodium Alginate E401 MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the Sodium Alginate E401 MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the Sodium Alginate E401 MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Sodium Ascorbate MSDS

Sodium Ascorbate E301 MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Sodium Ascorbate E301
1.2. Description: Sodium Ascorbate E301 is a organic compound manufactured through chemical synthesis.
1.3. Chemical Formula: C6H7NaO6
1.4. Molecular weight: 198.11
1.5. CAS #: 134-03-2
1.6. EINECS #: 205-126-1
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Sodium Ascorbate E301 manufacturer.
1.9. Usage: In food as Antioxidants

2. Composition

2.1. Sodium Ascorbate: 99.0 ‐ 101.0%
2.2. Hazardous impurities: Heavy Metals ≤0.001%, Arsenic ≤0.0003%, Lead ≤0.0002%, Mercury ≤0.0001%

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: White to slightly yellow cr ystalline powder
3.3. Odor: Odorless
3.4. pH: 7.0‐8.0 (10%, W/V )
3.5. Melting point/range: 218 °C (decomposes)
3.6. Boiling point: Not available
3.7. Bulk density: 1.66 g/cm3
3.8. Solubility: 62 g/100mL @ 25 °C)

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Store in a cool and dry place and Keep away from strong light and heat
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Sodium Ascorbate E301 need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Sodium Ascorbate E301 is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Sodium Ascorbate E301 dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Sodium Ascorbate is fully biodegradable and its products of degradation are more toxic.

12. Other Information

12.1. The information in this Sodium Ascorbate E301 MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the Sodium Ascorbate E301 MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the Sodium Ascorbate E301 MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Sodium Benzoate MSDS

Sodium Benzoate E211 MSDS

1.1. Product Name: Sodium Benzoate E211
1.2. Description: Sodium Benzoate E211 is a organic compound manufactured through chemical synthesis.
1.3. Chemical Formula: C7H5NaO2
1.4. Molecular weight: 144.1
1.5. CAS #: 532-32-1
1.6. EINECS #: 208-534-8
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Sodium Benzoate E211 manufacturer.
1.9. Usage: In food as Preservatives

2. Composition

2.1. Sodium Benzoate: 99.0% ~ 100.5%
2.2. Hazardous impurities: HEAVY METALS (AS PB) ≤10 PPM,ARSENIC ≤3 PPM,CHLORIDES ≤ 200 PPM

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: FREE FLOWING WHITE POWDER
3.3. Odor: Odorless
3.4. pH: Not available
3.5. Melting point/range:
3.6. Boiling point:
3.7. Bulk density:
3.8. Solubility:

4. Stability/Reactivity

4.1. Chemical Stability:
4.2. Shelf Life:
4.3. Hazardous decomposition:
4.4. Hazardous polymerization:
4.5. Incompatible with:

5. Handling/Storage

5.1. Storage: Store in a cool and dry place and Keep away from strong light and heat
5.2. Handling precaution:

6. Exposure Control

6.1. Engineering Controls:
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Sodium Benzoate E211 need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Sodium Benzoate E211 is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Sodium Benzoate E211 dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Sodium Benzoate is fully biodegradable and its products of degradation are more toxic.

12. Other Information

12.1. The information in this Sodium Benzoate E211 MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the Sodium Benzoate E211 MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the Sodium Benzoate E211 MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Sodium Carboxymethyl Cellulose MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Sodium Carboxymethyl Cellulose
1.2. Description: Sodium Carboxymethyl Cellulose is a organic compound manufactured through chemical synthesis.
1.3. Chemical Formula: [C6H7O2(OH)x(OCH2COONa)y]n
1.4. Molecular weight: Not Applicable
1.5. CAS #: 9004-32-4
1.6. EINECS #: 265-995-8
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Sodium Carboxymethyl Cellulose manufacturer.
1.9. Usage: In food as Thickeners

2. Composition

2.1. Sodium Carboxymethyl Cellulose: ≥99.0%
2.2. Hazardous impurities: Heavy metals Pb ≤0.002%, Arsenic ≤0.0002%

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: white to cream colored powder
3.3. Odor: Odorless
3.4. pH: 6.5-8.0
3.5. Melting point/range: 274 °C (decomposes)
3.6. Boiling point: Not available
3.7. Bulk density: 1.6 g/cm3
3.8. Solubility: 20 g/L

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Sodium Carboxymethyl Cellulose need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Sodium Carboxymethyl Cellulose is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Sodium Carboxymethyl Cellulose dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Sodium Carboxymethyl Cellulose is fully biodegradable and its products of degradation are more toxic.

12. Other Information

12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Sodium Erythorbate MSDS

Sodium Erythorbate E316 MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Sodium Erythorbate E316
1.2. Description: Sodium Erythorbate E316 is a organic compound manufactured through chemical synthesis.
1.3. Chemical Formula: C6H7NaO6
1.4. Molecular weight: 198.11
1.5. CAS #: 6381-77-7
1.6. EINECS #: 228-973-9
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Sodium Erythorbate E316 manufacturer.
1.9. Usage: In food as Antioxidants

2. Composition

2.1. Sodium Erythorbate: 98.0%-100.5%
2.2. Hazardous impurities: Heavy metals Pb ≤0.001%, Arsenic ≤0.0003%

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: White or a slightly yellow crystalline pellet or powder
3.3. Odor: Odorless
3.4. pH: 5.5-8.0
3.5. Melting point/range: 168–170 °C
3.6. Boiling point: Not available
3.7. Bulk density: Not available
3.8. Solubility: 16 g/100 mL @ 25 °C

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Store in a cool and dry place and Keep away from strong light and heat
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Sodium Erythorbate E316 need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Sodium Erythorbate E316 is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Sodium Erythorbate E316 dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Sodium Erythorbate is fully biodegradable and its products of degradation are more toxic.

12. Other Information

12.1. The information in this Sodium Erythorbate E316 MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the Sodium Erythorbate E316 MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the Sodium Erythorbate E316 MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS

Sodium Tripolyphosphate MSDS

1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Sodium Tripolyphosphate
1.2. Description: Sodium Tripolyphosphate is a inorganic compound manufactured through chemical synthesis.
1.3. Chemical Formula: Na5P3O10
1.4. Molecular weight: 367.864
1.5. CAS #: 7758-29-4
1.6. EINECS #: 231-838-7
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Sodium Tripolyphosphate manufacturer.
1.9. Usage: In food as Preservative and Emulsifier

2. Composition

2.1. Sodium Tripolyphosphate: ≥95.0%
2.2. Hazardous impurities: HEAVY MENTAL (AS PB) ≤10PPM, Arsenic ≤3PPM, Lead ≤4PPM, Mercury ≤1PPM, SULPHATES ≤0.4%

3. Physical/Chemical Characteristics

3.1. Physical State: Solid
3.2. Appearance: WHITE GRANULAR
3.3. Odor: Odorless
3.4. pH: 8
3.5. Melting point/range: 622 °C
3.6. Boiling point: Not available
3.7. Bulk density: 2.52 g/cm3
3.8. Solubility: 14.5 g/100 mL @ 25 °C

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Not Applicable
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Oxidizing agents

5. Handling/Storage

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Sodium Tripolyphosphate need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Sodium Tripolyphosphate is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: Non-flammable.
9.2. Flash point: Not available
9.3. Ignition control: Not applicable
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

11.1. Sodium Tripolyphosphate is fully biodegradable and its products of degradation are more toxic.

12. Other Information

12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Posted on 13 Jul 2015
By Marketing
In MSDS