Textured Soy Protein MSDS,Textured Soy ProteinMaterials Safety Data Sheet

Textured Soy Protein MSDS

1.1. Product Name: Textured Soy Protein
1.2. Description: Textured Soy Protein is a protein manufactured through soybean extraction.
1.3. Chemical Formula: Not Applicable
1.4. Molecular weight: Not Applicable
1.5. CAS #: 9010-10-0
1.6. EINECS #: 232-720-8
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Textured Soy Protein manufacturer.
1.9. Usage: In food as Nutrition supplements

4.1. Chemical Stability: Stable
4.2. Shelf Life: 24 month period (Must be stored under typical conditions of 75°F and 60% relative humidity)
4.3. Hazardous decomposition: Not Applicable
4.4. Hazardous polymerization: Not Applicable
4.5. Incompatible with: Acids, oxidizers, corrosives and poisonous substance

5.1. Storage: stored in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities. avoid dust formation and control ignition sources.
5.2. Handling precaution: Avoid breathing dust; use in an area with adequate ventilation.

6.1. Engineering Controls: Use adequate ventilation to keep airborne concentrations low
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Not applicable
6.5. Other: Consult professionals if Textured Soy Protein need to be handled under some special conditions.

7.1. Hazardous overview: Textured Soy Protein is not classified as a Dangerous Substance
7.2. Contact with eyes: May cause irritation
7.3. Contact with skin: May cause irritation, very low chance for usual industrial handling
7.4. Ingestion: No hazard expected in normal industrial handling
7.5. Inhalation: May cause respiratory tract irritation
7.6. Other: Avoid build up of dust particles. Possibility of dust explosion.

8.1. Contact with eyes: Flush immediately with plenty of water and seek medical advice
8.2. Contact with skin: Not applicable
8.3. Ingestion: No specific treatment is necessary
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately

9.1. General information: Build up of textured soy protein dust may cause dust explosion
9.2. Flash point: Not applicable
9.3. Ignition control: Avoid ignition sources where textured soy protein dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Sand, Dry Chemical, Water through fogging to limit dusting
9.6. Spills/Leaks: Recover product by vacuum or broom and shovel. Flush area with water to remove final traces.

10.1. No special requirements and no restrictions on transportation by land, sea or air.

12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Post Tags - Textured Soy Protein MSDS