Gamma-Aminobutyric acid MSDS

1. SUBSTANCE IDENTIFICATION

• 1.1. Product Name: gamma-Aminobutyric acid
• 1.2. Description: gamma-Aminobutyric acid is a organic chemicals manufactured through chemical synthesis.
• 1.3. Chemical Formula: C4H9NO2
• 1.4. Molecular weight: 103.12
• 1.5. CAS #: 56-12-2
• 1.6. EINECS #: 200-258-6
• 1.7. Manufactured by: China manufacturer.
• 1.8. Supplied by: China gamma-Aminobutyric acid manufacturer.
• 1.9. Usage: In food as Nutrition supplements

2. Composition

• 2.1. gamma-Aminobutyric acid: 100%
• 2.2. Hazardous impurities: Negative

3. Physical/Chemical Characteristics

• 3.1. Physical State: Powder
• 3.2. Appearance: white crystal, pale yellow Powder
• 3.3. Odor: Not available
• 3.4. pH: 6.5 – 7.5
• 3.5. Melting point/range: 203.7 °C
• 3.6. Boiling point: 247.9 °C
• 3.7. Bulk density: 1.11 g/cm3
• 3.8. Solubility: 130 g/100 mL @ 25 °C

4. Stability/Reactivity

• 4.1. Chemical Stability: Stable under normal temperatures and pressures
• 4.2. Shelf Life: 24 months period
• 4.3. Hazardous decomposition: Carbon oxides (CO, CO2)
• 4.4. Hazardous polymerization: Will not occur
• 4.5. Incompatible with: Strong oxidizing agents, Strong inorganic acids.

5. Handling/Storage

• 5.1. Storage: kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
• 5.2. Handling precaution: Avoid inhalation. Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated exposure.

6. Exposure Control

• 6.1. Engineering Controls: Safety shower and eye bath. Mechanical exhaust required.
• 6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
• 6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
• 6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
• 6.5. Other: Consult professionals if gamma-Aminobutyric acid need to be handled under some special conditions.

7. Hazards Identification

• 7.1. Hazardous overview: gamma-Aminobutyric acid is not classified as a Dangerous Substance
• 7.2. Contact with eyes: May cause eye irritation.
• 7.3. Contact with skin: May cause skin irritation.
• 7.4. Ingestion: May cause irritation of the digestive tract.
• 7.5. Inhalation: May cause respiratory tract irritation.
• 7.6. Other: Not Applicable

8. First Aid Measures

• 8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
• 8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
• 8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
• 8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

• 9.1. General information: Not flammable or combustible.
• 9.2. Flash point: Not available
• 9.3. Ignition control: Not applicable
• 9.4. Dust control: Keep the handling area with adequate ventilation
• 9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
• 9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10. Transport Information

• 10.1. No special requirements and no restrictions on transportation by land, sea or air.

11. Ecological Information

• 11.1. gamma-Aminobutyric acid is fully biodegradable.

12. Other Information

• 12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.