Modified Starch MSDS,Modified Starch Materials Safety Data Sheet

Modified Starch MSDS

1.1. Product Name: Modified Starch
1.2. Description: Modified Starch is a group of starch derivatives manufactured through chemical synthesis.
1.3. Chemical Formula: (C6H10O5)n
1.4. Molecular weight: Not Applicable
1.5. CAS #: 65996-63-6
1.6. EINECS #: Not Applicable
1.7. Manufactured by: China Manufacturer.
1.8. Supplied by: China Modified Starch Manufacturer.
1.9. Usage: In food as hickening agent, stabilizer or emulsifier

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.

6.1. Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Modified Starch need to be handled under some special conditions.

7.1. Hazardous overview: Modified Starch is Slightly hazardous in case of inhalation (irritant), of eye contact (irritant), of ingestion, of skin contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause irritation to the respiratory tract and gastrointestinal
7.6. Other: Not Applicable

8.1. Contact with eyes: Flush with plenty of water or eye wash solution for 15 minutes. Get medical attention if irritation persists.
8.2. Contact with skin: Wash with soap and water- get medical attention if irritation occurs.
8.3. Ingestion: Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
8.4. Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid Daidzein ignition sources Modified Starch Powder might be generated.
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Not available
9.6. Spills/Leaks: Use appropriate tools to put the spilled solid in a convenient waste disposal container. If necessary: Neutralize the residue with a dilute solution of acetic acid.

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11.1. Modified Starch is fully degradation biodegradable.The product itself and its products of degradation are not toxic

12.1. The information in Modified Starch MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Post Tags - Modified Starch MSDS