Inositol MSDS,Inositol Materials Safety Data Sheet

Inositol MSDS

1.1. Product Name: Inositol
1.2. Description: Inositol is a chemical compound manufactured through chemical synthesis.
1.3. Chemical Formula: C6H12O6
1.4. Molecular weight: 180.16
1.5. CAS #: 87-89-8
1.6. EINECS #: 229-485-9
1.7. Manufactured by: China manufacturer.
1.8. Supplied by: China Inositol manufacturer.
1.9. Usage: In food as Nutritional Supplements

2.1. Inositol: ≥98.0%
2.2. Hazardous impurities: Heavy Metals ≤10PPM, Lead ≤4MG/KG, SULPHATE ≤0.006%, Mercury ≤0.1PPM, Arsenic ≤3MG/KG

5.1. Storage: kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Inositol need to be handled under some special conditions.

7.1. Hazardous overview: Inositol is Slightly hazardous in case of inhalation, skin contact, ingestion or eye contact.
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: May cause skin irritation.
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash the affected area with water, remove contaminated clothing and launder before re-use. Seek medical advice if irritation develops or persists.
8.3. Ingestion: Rinse mouth thoroughly with water and drink water afterwards.
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9.1. General information: May be combustible at high temperature.
9.2. Flash point: Not available
9.3. Ignition control: Avoid ignition sources where Inositol dust might be generated
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Water spray, dry chemical or carbon dioxide
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

10.1. No special requirements and no restrictions on transportation by land, sea or air.

11.1. Inositol is fully biodegradable and its products of degradation are not toxic.

12.1. The information in this MSDS was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond our control, it is the responsibility of the user both to determine safe conditions for use of this product and to assume liability for loss, damage, or expense arising out of the products improper use. No warranty expressed or implied regarding the product described herein will be created by or inferred from any statement or omission in the MSDS. Various federal, state, or provincial agencies may have specific regulations concerning the transportation, handling, storage, use, or disposal of this product which may not be reflected in the MSDS. The user should review these regulations to ensure full compliance.

Post Tags - Inositol MSDS